Electric High Power

Upgraded SS-331H/HTZ LCD Electric Desoldering Gun Anti-static High Power Strong

Upgraded SS-331H/HTZ LCD Electric Desoldering Gun Anti-static High Power Strong
Upgraded SS-331H/HTZ LCD Electric Desoldering Gun Anti-static High Power Strong
Upgraded SS-331H/HTZ LCD Electric Desoldering Gun Anti-static High Power Strong
Upgraded SS-331H/HTZ LCD Electric Desoldering Gun Anti-static High Power Strong
Upgraded SS-331H/HTZ LCD Electric Desoldering Gun Anti-static High Power Strong
Upgraded SS-331H/HTZ LCD Electric Desoldering Gun Anti-static High Power Strong
Upgraded SS-331H/HTZ LCD Electric Desoldering Gun Anti-static High Power Strong
Upgraded SS-331H/HTZ LCD Electric Desoldering Gun Anti-static High Power Strong
Upgraded SS-331H/HTZ LCD Electric Desoldering Gun Anti-static High Power Strong
Upgraded SS-331H/HTZ LCD Electric Desoldering Gun Anti-static High Power Strong
Upgraded SS-331H/HTZ LCD Electric Desoldering Gun Anti-static High Power Strong
Upgraded SS-331H/HTZ LCD Electric Desoldering Gun Anti-static High Power Strong

Upgraded SS-331H/HTZ LCD Electric Desoldering Gun Anti-static High Power Strong

Upgraded SS-331H/HTZ LCD Electric Desoldering Gun Anti-static High Power Strong. Pro'sKit SS-331H LCD Electric Desoldering Gun Anti-static High Power Strong. Pro'sKit made a comprehensive upgrade for the explosive product SS-331H.

After upgrading, the function and performance of the product were effectively improved. The effect is doubled, and the automatic sleep function is added to effectively improve the service life. Voltage: 220 V-240 V 50 Hz.

Temperature:160 deg C 480 deg C. Vacuum Pressure:>600 mm Hg. SS-331H LCD desoldering station is efficient desoldering tool with a built-in vacuum for through-hole boards and components. It is a thermostatically controlled desoldering station that provides low cost and high performance. Ergonomically friendly structure allows one hand operation, only takes a few seconds per pin, more safe, efficient and comfortable. High power desoldering tool with vacuum. Efficient operation, quick and easy. Microprocessor Controlled, provides accurate temperature control from 160 to 480°C. Ceramic heater, provides fast heat up, fast recovery and high insulation resistance. Designed with a quality heating element, it provides higher performance and longer lifetime than traditional type. Built-in high power 600mmHg air pump, particularly for lead-free desoldering of multilayer boards. Quick and easy to set the desired temperature and check the actual temperature.

Fahrenheit or Celsius unit selection. Voltage:220V 50Hz NOT support 110V. After each work, it is recommended to suction 3-5 times and empty the residual tin in the tube.

If the interval between use is about 20 minutes, it is recommended to clean the steel pipe with a needle after air suction. It is found that the suction is reduced during use, please clean the steel pipe with a needle.

If the frequency of use is very low, it is recommended to adjust the tin gun to about 200 degrees, and then to the working temperature when using. When the tin slag in the tin storage cylinder is about 1/2, it should be cleaned in time.

When the filter cotton is found to be hardened, it needs to be replaced in time. It is Recommended to take 3-5 times of Empty Suction to Full Clear the residual Tin in The Tube.

If the interval is about 20 minutes, it is recommended to use a needle to clean the steel pipe after empty suction. During the use, If the suction is reduced. Please use a needle to clean the steel pipe.

If you do not use often, it is recommended to adjust the tin gun to about 200 degrees, and then adjust to the working temperature when using it. When there is about 1/2 of the tin slag in tin storage. It should be cleaned in time. When the filter Spong is hardness, Pls replaced in time. The Reason For Block Desoldering Gun.

2Did not clean in time when too much tin slag in the tin storage tube , This will effect the Gun's suction , In this case , you should remove tail's tin slag. It can be removed only after you use the soldering iron to heat the tin until it melt. Order may be cancelled due to insufficient of your information.

Missing item or get wrong item or damaged items, or the item seams can not work well, please keep all the items in original condition, make all the items together with packing, then take some photos of them and send us the photos by message box. (2) How we will react?

(sometimes you may be requested to return the incorrect item). (3) Valid time for returning. We promise to achieve your 100% satisfaction.

Thank you so much for your kindness and understanding. The item "Upgraded SS-331H/HTZ LCD Electric Desoldering Gun Anti-static High Power Strong" is in sale since Monday, February 1, 2021. This item is in the category "Business & Industrial\CNC, Metalworking & Manufacturing\Welding & Soldering Equipment\Soldering/Desoldering Equipment & Accessories\Soldering Guns & Irons". The seller is "superstronger" and is located in CN. This item can be shipped worldwide.

  • Country/Region of Manufacture: China
  • MPN: Does Not Apply
  • Item Type: Desoldering Gun
  • Brand: ProsKit

Upgraded SS-331H/HTZ LCD Electric Desoldering Gun Anti-static High Power Strong