30MPa High PCP Electric Air Compressor Pump 12V/110V/220V PCP Pressure +SMPS. 12 / 110V 30MPa 4500PSI Air Compressor Pump PCP Electric High Pressure. The product has you anticipated outstanding quality and convenience. The product is equipped with high pressure rubber hose, to apply to multipurpose use. Fit for high pressure air guns, cars, home appliances.Two-stage compression used by this product has the feature of large displacement, quick air inflation, which could be not only used for diving fire cylinder, but also could be used. In car, lorry, truck and other automobiles. One machine serves several purpose, with a wide application range.
A universal fast connection and charging connector is accompanied with the machine, in addition to inflation bottle, it could also be used for. Cars, motorbike, electric vehicles and other vehicles. Fire fighting, diving, leakage detecting, pressure-tight test, automobiles, etc.
The inflation pressure can reach 4500 PSI, and the inflation speed is fast; 2. The product is light and portable, and can be used for outdoor converters or indoors; 3. No need for external water pump to cool. Wide range of applications, PCP inflation, car tire inflation, kayaking inflatable, diving oxygen tank inflation, etc.
5.5mpa or less can work continuously; 6. The product has stable performance and long service life. Suitable for high pressure air guns, cars, home appliances.High Pressure 30Mpa electric pump can be used for fire fighting, air soft, paintball, leakage detecting, pressure-tight test, automobile tyres, etc. 110/220V AC to DC 50A 600W Switch AC DC Power Supply Driver Adapter Transformer. Switching power supply is a kind of energy electronic circuit product with high frequency switch, Which is often used as the power supply of equipment. The switching power supply is characterized by high efficiency, small volume and high applicability based on the operating principle. Switching power supply has over/under voltage, over current, over heat protection and fan heat dissipation protection functions. Input voltage double gear selection, high power output. Safe and stable, long service life. Light and portable, easy to operate. Dial to the correct gear position, cut off the power before disassembling the connection. 1x Switching Mode Power Supply. Spare parts parts drawings and list. M34 round head hex screw. M48 round head hex screw. O ring 10 1.5.
M4 4 Low head screw. M6 30 hex Socket Screw. High pressure piston open loop. M36 round head hex screw. Open the package , read the manual carefully, check the parts list (see sheet 1), if anything missing pls contact with the sales.
A number of tests has be done before. Packing , the quick connector and plug have been assembled, the user only needs to turn on the power, dial the start switchsee. When use the car battery loading , must connect the positive pole to the red wire and the negative pole to the black wire!
After turn on the compressor, listen whether there have any abnormal sounds(such as; Friction sounds, uneven movement sounds, leakage sounds) at first, and then check the parts for loose fasteners. And observe the speed of the pressure gauge pointer. From 0 to 300 bars, it should be about 20 seconds(using the test plug state). Firstly, find the location of the battery position of the car, confirm the positive and negative poles of the battery, and make sure that the compressor is switched off and release the bleed valve. Clip the red clamps to the positive pole or screw, the blue (or black) clamps to the negative pole or screw, then start the car.
Pull out test plug and keep it in place. The test plug is the very important component to check and analysis the compressor fault. Connect the quick connector and check the fitness between the quick connector and the male head (The leakage caused by the unmatched quick connector is the main reason that most of the quick connector cannot be pumped, which can be usually detected with soap water). Toggle the switch to start the compressor, check whether the two cooling fans are working normally.
Tighten the bleed valve and start filling after making sure everything is normal. Please note that the operator should not be too close to the inflatable container during air pumping. Please keep a safe distance.
Closely observe the indicated pressure of the gauge. The highest design pressure value of the compressor is 310BARS.When the gauge reaches the required pressure value, please turn off the switch in time! Then open the bleed valve, drain the air and water, and then open the quick connector. Pls open the bleed valve, release the moisture, take off the connector with the tank, reassemble the test plug. The clamps on the positive and negative poles in order. Cleaning the surface if the compressor , coil the wire on the machine after the compressor cool down. Pls avoid the compressor scratch with the hard objects when it is in the car ;pls avoid to put the compressor in the wet area;place the compressor upright. Household electric appliance:please use our specified voltage converter which has a slide switch and 110V & 220V indicator on the side, and. To the right indicator according to the applicable voltage where used. The voltage converter shall be damaged by error operations. After the voltage confirmed, the compressor power cable to be clipped first, and then the red cable to be connected to positive pole, and blue or black cable to be connected to the negative pole. Please switch on the plug, and start the machine after the indicator light in the voltage converter is on. The operation to be as per the procedure of aforementioned No. When stored, please firstly pull out the plug and then stored as per storage procedure No. The internal mechanical parts of the machine are lubricated with grease. After using the machine for 50 hours, need to add some grease in.
Add method: open the oil plug (# 51) with a wrench, and the machine is powered on. Turn on and off the power switch frequently to stop the machine at the position shown in figure 4. Add some grease to the high pressure rod no. 77 with the syringe (it is forbidden to add grease when the machine is working), after the high pressure rod is added.Turn on and off the power switch frequently again to stop the machine at the position shown in figure 5 and figure 6. Use the tip of the syringe to support the threaded hole on the connecting rod pin (52#) and add grease.
Then add some grease to both sides of the connecting rod pin. Install the oil plug and the machine will work normally. When the machine is working for 100 hours, clean or replace the filter cotton (61#) in the handle. When the machine is used for a long time and the gas at the air outlet is found to contain impurities, please replace the filter cotton (27#) in time.30MPa Air Compressor Pump 110V PCP Electric 4500PSI High Pressure 1800W. Welcome to our store, maybe you also like. There are 3 types of options. Type ASwitching Mode Power Supply1. Type B12V Air Compressor Pump 1; Instruction manual1; Fitting kit 1.
Type C12V Air Compressor Pump 1; Instruction manual 1; Fitting kit 1; Switching Mode Power Supply1. Note: New version does not include grease any more. User manual is for old version. We will revise this when old user manual stock run over.
30MPa 4500PSI High Pressure Air Compressor PCP Pump /. Oil-Free / Powered by Car 12V DC or Home 110V AC with Adapter / Paintball/Scuba Tank Compressor. The GX CS2 is specially designed for PCP, Paintball, scuba diving inflating that with less than 60ci air tank. This is a portable oil-free and fan cooling pcp compressor pump. Oil-Free & Water-Free & Built-In Fan Cooling for Long Life.
Unlike other electric high pressure air pump which needs the standard oil and cooling water when working in the market, the product does not need oil, clean and hygienic, no need for external water pump to cool, easy to operate. This will save you a lot of energy in future using. Convenient Car 12V DC or Home 110V. This air compressor can be powered by the 12V car battery (Notenot the car cigarette light plug), aslo can be powered by the home AC outlet with the extra 110V.
Transformer (included in the package). This will make this air pumb more usefull as you can use it anywhere. Fast Inflating Speed and Powerful. This new air compressor can provide up to 250W power.
The inflation pressure can reach 4500 PSI/300 Bar and the air pump inflating speed can reach 2700r/min. Test Inflating Result : 0.5L container, from 200BARS to 300BARS takes about 10 minutes;Test Inflating result : 0.5L container, from 0BARS to 300BARS takes 22-26 minutes. This electric air pump is maily designed to use for devices with less 60cubic inch tank, such like PCP airgun rifles, paintball, diving bottle inflation.Note: Don't suggest to inflate over 1L tank as it will cause damage to the 12V compressor. It can also be used fire fighting, leakage detecting, pressure-tight test, automobiles, etc. Light Weight, Compact Size, Easy to Carry. The net weight is just 6.7kg. Wherever you go, whenever you need, just take it with you. You can also get a 1 year worry-free after-sale service. We will definitely solve the problem for you. Voltage: DC 12V for car battery, AC 110V for home outlet.
Cooling system: Built-in fan cooling. Pump Size: L 8.46. Adapter Size:L 8.85in. 1, This verison is not auto-stop version, please turn it off manually when the pressure gauge reach the value. Note: If inflate your airgun tank over 1L, plsease shut down to cool down 30 minutes after using 30 minutes and then recharge.If your device can't be inflated or the speed is very slow, please check if the quick connector is normal. 4, Keep your children away from it when working.
SMPS 110V/220V AC to 12V DC Converter Power Supply Adapter Switch Transformer Max 50A 600W (New Version). Common power conversion modes include AC-DC. Dual input voltage: AC 110V/220V-240V.
Wide voltage input adjusted automatically to SMPS Model (12V 1A-5A, 12W-60W). As for Model (12V 10A-60A 120W-600W), there is a voltage selector switch located on the side of the switcher is used to set the input voltage to the power supply to either 110V/115V or 220V/230V. Output current depends on the decive, such like 10A 120W, 20A 240W, 30A 360W, and the max current is 50A, power 600W.
Note: the peak power is 50A, 600W. It does not mean it can fit rate power 600W.For motor device, the start current will be much higher that rate power. If use resistive equipment , such like led strips, you can use higher power, such like 40A rated leds will also be OK. Safe and Stable, Long Service Life:Switching power supply has over/under voltage, over current, over heat protection and fan heat dissipation protection functions. Light and Portable, Easy to Operate: Net weight only 1.2 Kg.
Super convenient for devices with clamps. You can clamp to the two cylindrical contacts directly. Material of Cover: Metal Model: 12 Power Supply AC input:110V/220V±15% DC output: 12V 50A Wattage:600W Power:12V 50A 600W Size: L 8.85inW4.52inH2.36in(22.5cm11.5cm6cm). No APO/FPO addresses or PO Boxes allowed. Local pickups is not provided at this time.We are not responsible for undeliverable addresses. Please contact our customer service team immediately if.
You changed your mind and wish to request a return. Your product was damaged during transit.Please do not return or post items before obtaining instructions from us. This also applies to orders cancelled while in transit. Please make sure that item has NO man-made sabotage.
Used items will not be accepted for return. We will require a picture of the damaged part for verification.The item "Portable Air Compressor Pump 30MPa 4500Psi High Pressure Electric 12V/110V/220V" is in sale since Wednesday, September 11, 2019. This item is in the category "Sporting Goods\Outdoor Sports\Air Guns & Slingshots\Accessories". The seller is "mightypower" and is located in Monroe Township, New Jersey. This item can be shipped to United States.